SELF CONTAINED UNIT Variable Capacity

Banner compatti white

SELF CONTAINED UNIT  VARIABLE CAPACITY INVERTER TECHNOLOGY

 

Advanced Inverter Variable Capacity technology coupled with R410A refrigerant provides the benefits of:

- low operation noise
- elimination of starting current peaks
- rapid cooling
- heating as well as maximum energy efficiency.

ADVANTAGES

-  ENERGY SAVING (-40% ELECTRICAL CONSUMPTION)
-  ONLY 2A PEAK CURRENT AT STARTING
-  HIGHER AIR CONDITIONING RELIABILTY
-  POSSIBILITY TO REDUCE THE POWER GENERATOR SIZE
-  REFRIGERANT FLUID R410A
-  COMPLY WITH EMC DIRECTIVE

View the data sheet of NEW GENERATION
SELF CONTAINED UNIT Variable Capacity.

Download

SCU07VFD-A

Art. SCU07VFD-A

 
SCU07VFD-A
Width
17 in
Height
11.1 in
Depth
10.2 in
Weight
48.6 lb
Voltage 115 V / 1ph / 50-60 Hz
Cooling capacity
7,000 BTU/h
Heating capacity
7,000 BTU/h
Max input power
470 W
Max Current
4.2 A
Cooling capacity ECO 3,000 BTU/h
Input power ECO mode 150 W
Refrigerant fluid
R410
Refrigerant charge
0.78 lb
Air exit duct ( for max capacity) 5 in
 *excluding electric box  
Working limits:  

Seamare temperature in winter mode > + 5°C / + 41°F

Seamare temperature in summer mode < 45°C / 113°F

Frigomar SCU07 10
 

SCU10VFD-A

Art. SCU10VFD-A

 
SCU10VFD-A
Width
17 in
Height
11.1 in
Depth
10.2 in
Weight
48.6 lb
Voltage 115 V / 1ph / 50-60 Hz
Cooling capacity
10,000 BTU/h
Heating capacity
10,000 BTU/h
Max input power
730 W
Max Current
6.5 A
Cooling capacity ECO 3,000 BTU/h
Input power ECO mode 150 W
Refrigerant fluid
R410
Refrigerant charge
0.78 lb
Air exit duct ( for max capacity) 5 in
 *excluding electric box  
Working limits:  

Seamare temperature in winter mode > + 5°C / + 41°F

Seamare temperature in summer mode < 45°C / 113°F

Frigomar SCU07 10
 

SCU12VFD-A

Art. SCU12VFD-A

 
SCU12VFD-A
Width
19.7 in
Height
13.2 in
Depth
11.4 in
Weight
59.5 lb
Voltage 115 V / 1ph / 50-60 Hz
Cooling capacity
12,000 BTU/h
Heating capacity
12,000 BTU/h
Max input power
750 W
Max Current
6.9 A
Cooling capacity ECO 3,900 BTU/h
Input power ECO mode 200 W
Refrigerant fluid
R410
Refrigerant charge
0.99 lb
Air exit duct ( for max capacity) 6 in
 *excluding electric box  
Working limits:  

Seamare temperature in winter mode > + 5°C / + 41°F

Seamare temperature in summer mode < 45°C / 113°F

Frigomar SCU12 16
 

SCU16VFD-A

Art. SCU16VFD-A

 
SCU16VFD-A
Width
19.7 in
Height
13.2 in
Depth
11.4 in
Weight
59.5 lb
Voltage
115 V / 1ph / 50-60 Hz
Cooling capacity
16,000 BTU/h
Heating capacity
16,000 BTU/h
Max input power
1,090 W
Max Current
10 A
Cooling capacity ECO 3,900 BTU/h
Input power ECO mode 200 W
Refrigerant fluid
R410
Refrigerant charge
0.99 lb
Air exit duct ( for max capacity) 6 in
 *excluding electric box  
Working limits:  

Seamare temperature in winter mode > + 5°C / + 41°F

Seamare temperature in summer mode < 45°C / 113°F

Frigomar SCU12 16
 

 

599 NT

Art.599 NT

 
599 NT
Width 
702 mm (779mm*)
27.6 in ( 30.7 in*)
Height 
471 mm
18.5 in
Depth
340 mm
13.4 in
Weight 
44 kg
97 lbs
Voltage
230 V / 1ph / 
50-60 Hz
Cooling capacity
11.000-27.000 BTU/h
Heating capacity
11.000-27.000 BTU/h
Max input power cooling
1,72 kW
1.72 kW
Max input power heating
1,74 kW
1.74 kW
Max current
7,8 A
7.8 A
Air exit duct ( for max capacity)
4 x ø 152 mm
4 x 6 "
Refrigerant fluid
R410
Refrigerant charge
0,95 kg
2.1 lbs
 *including electrical box  
Working limits:  

Seamare temperature in winter mode > + 5°C / + 41° F

Seamare temperature in summer mode < 40°C / 104° F

Self contained unit599NT white

 

 

590 NT

Art.590NT

 
590NT
590NT-A 590NT
Width
430 mm 
430 mm 
Height 
285 mm
285 mm
Depth
260 mm
 260 mm
Weight ( including electrical box)
23,5 kg
 23 kg
Remote electric box dimension 250 x 200 x 100 mm 250 x 200 x 100 mm 
Voltage/phase/cycle 230 V / 1ph / 50 Hz 115 V/ 1ph/ 60 hz 
Max cooling capacity 6.500 BTU/h 6.000 BTU/h 
Max input power cooling
550 W
480 W 
Max heating capacity
6.500 BTU/h
6.000 BTU/h 
Max input power heating
610 W
530 W 
Max current
2,9 A
5,0 A 
LRA
12
 19
Max seawater flow
1,3 m3/h
1,3 m3/h 
Min seawater flow
0,8 m3/h
0,8 m3/h 

Air exit duct diameter

120 mm 120 mm 
Number of ducts  1-3 1-3 
Refrigerant R410A 0,330 kg 0,330 kg 
Room thermostat plate (external size) 117 x 80 mm 117 x 80 mm 
Room controller size 150 x 55 mm 150 x 55 mm 
     
 
 

 

TECHNICAL DATA

Inverter Variable Capacity Technology.
This technology is used to control the speed of the compressor motor to allow continuously regulated temperature; by contrast traditional air conditioners regulate temperature by using a compressor that is periodically either working at maximum capacity or completely switched off. The inverter air conditioner is equipped with a variable frequency driven brushless DC compressor that incorporates an adjustable electrical inverter to control the speed of the motor and thus the compressor and cooling output. Eliminating stop-start cycles considerably increases the energy efficiency, extends the life of components and eliminates sharp fluctuations on water temperature and power supply. By using the Inverter Brushless DC Air conditioner it is possible to reduce on board the size of power generator.


Energy saving (-40% in average electrical energy consumption).
After the water temperature approaches the set temperature, Inverter Control adjusts to low capacity operation to maintain this temperature. Variable capacity operation together with brushless DC motor higher efficiency make inverter air conditioning more energy-saving than non-inverter models, which must repeatedly start or stop their compressors to maintain the water temperature. In term of Seasonal Efficiency Ratio, the average reduction in electrical energy consumption is 40%, compared to the equivalent traditional air conditioner

 

Smooth starting (No peak current at start)
Starting ramp is set at very low frequency (20 Hz) allowing very low starting torque and starting current, far below the nominal value. The max starting current is 2 A, while for the equivalent traditional air conditioner the max starting current is 60-70 A, even with soft starting devices.

 

Powerful
Inverter air conditioning operates at maximum capacity after start up phase. As a result, the set temperature is reached more quickly.

 

Comfortable
Inverter air conditioning finely adjust capacity according to changes in the air-conditioning load and the difference between the water temperature and set temperature is very small. These give much higher comfort levels than with non-inverter air conditioners. Thanks to brushless DC motors and sound shields the operation noise is very low.

 

Variable Capacity Operation (ECO function)
Inverter air conditioning is able to vary its operating capacity. Non-inverter air conditioners can only operate at a fixed capacity. ECO function is available on inverter air conditioning, to further reduce power supply whenever other electrical appliances are being used in the same time.

 

Relaiable
Brushless DC motor together with variable capacity operation allow a much longer compressor lifetime than non-inverter models, which must repeatedly start or stop their compressors during operation stressing motor coils.


Easy installation

Very small overall dimensions, no need of drain (thanks to thermal insulation) and possibility to install the display controller in different positions.


Comply with EMC Directive
The equipment complies with the Electromagnetic Compatibility (EMC) Directive 2004/108/EC.






© 2009 - 2019 All Rights Reserved. credits